In-Situ Aqua TROLL 100 and 200 Operators Manual - Manual (Page 27)

Page 27 Aqua TROLL Operator’s Manual
Select a TROLL Com for Communication
The figure below shows the function and connectability of the
different models of TROLL Com.
Section 3: Getting Started
TIPS: A Direct
Connect TROLL Com
may be preferred for
programming an Aqua TROLL
Instrument that will be deployed
on wire.
RuggedCable and a Cable
Connect TROLL Com are required
for communication with the
device while deployed, but
programming can be done with
any TROLL Com connection.
An RS232 (serial) TROLL
Com is needed for use with a
RuggedReader.
Serial port
RS232
connections
USB port
USB
connections
Direct Connect
TROLL Coms:
Not designed for
submersion
Cable Connect TROLL Coms:
Designed for field use