In-Situ Aqua TROLL 100 and 200 Operators Manual User Manual
Page 61
Advertising
![background image](/manuals/367689/61/background.png)
Page 61
Aqua
TROLL Operator’s Manual
3. In the Sensor Setup window, select the Level parameter, then
click Configure...
The Level parameter shown is the one currently stored in the
device. This is the default or the most recent choice. You will
have a chance to change the parameter later.
Click
Configure...
Select the
Level
parameter
TIP: Parameter
configuration is not
available if the device
is polling or has an active log.
Section 6: Pressure & Level
Advertising
This manual is related to the following products: