In-Situ Aqua TROLL 100 and 200 Operators Manual - Manual (Page 35)

Page 35 Aqua TROLL Operator’s Manual
Section 4: Using Win-Situ
4. Software connects and displays a reading of all supported
parameters.
The Home Screen
4
Note the Tabs at the top of the screen—this is the Home tab,
which displays current readings from the connected device.
4
The Dashboard (status area) shows the device model &
serial number, battery and memory usage, clock, alarms, and
logging status.
4 The Control Panel contains action buttons. To update the
readings in real time, press .
Note: When this button looks “pressed in” , polling is
active. Before you can perform certain software tasks, you will
need to stop polling by pressing the button again.
Control Panel
Home tab
Tabs
Dashboard
Click here to update readings
in real time
Device is connected