In-Situ Aqua TROLL 100 and 200 Operators Manual - Manual (Page 44)

Page 44 Aqua TROLL Operator’s Manual
Section 4: Using Win-Situ
Tips for Aqua TROLL Data Logs
• Nine parameters are available for the Aqua TROLL 200
Instrument. Seven parameters are available for the Aqua
TROLL 100 Instrument. All selected parameters are logged,
with implications for battery and memory usage.
• Only one active log can reside in the device at a time.
An active log is a log that is Ready, Pending, Running, or
Suspended as shown in the Status column of the Logging
Tab.
• To avoid draining the Aqua TROLL battery prematurely,
external power is required for Event logging, and
recommended for Linear Average logging.
• For information on selecting a Level output, refer to the Win-
Situ Help menu, or Section 6 in this manual.
• For a non-vented Aqua TROLL that will be deployed on wire,
be sure to select a Scheduled Start so the log will start by
itself, without a communication connection.
• For more complete information on setting up data logs, see
the Win-Situ Help menu .