Badger Meter SRD/SRI Valve Positioners - Manual (Page 44)

SRD960 with HART or Without Communication
(With the other versions of the SRD, these menus cannot be selected.)
5.5 Split Range 0 %
- 1 - 1 - LED1 and LED 3 lights up
LED: The value that was adjusted e.g. with an loop calibrator at the input of
the SRD, is entered with confirmation of key ( ) as 0 % value.
LCD: By pressing of keys (
+) or (–) the value is adjusted and confirmed
with key ( ).
5.6 Split Range 100 %
- - - 1 1 LED 3 and LED 4 lights up
LED: The value that was adjusted e.g. with a loop calibrator at the input of
the SRD, is entered with confirmation of key ( ) as 0 % value.
LCD: By pressing of keys (
+) or (–) the value is adjusted and confirmed
with key ( ).
The keys have Autorepeat: By pressing and holding of a key (+) or (–) , the value is counted
upward, after some time in larger steps.
Example: An input current of 10.4 mA has to correspond to a valve position
of 100 %.
5 Limits/Alarms
5.4 Upper limit
5.5 Splitr 0 %
5.6 Splitr 100 %
5 Limits/Alarms
5.4 Upper limit
5.5 Splitr 0 %
5.6 Splitr 100 %
5.6 Splitr 100 %
10.4 mA
Page 44
Startup
August 2014 POS-UM-00009-EN-02