Badger Meter SRD/SRI Valve Positioners User Manual

Page 52

Advertising
background image

SRD960 with PROFIBUS PA:

Menu 10: Bus Address

M

1

2

3

4

½

-

-

½ ½

M, LED 3 and LED 4 flash

Here the bus address of the SRD can be indicated and changed. The bus
address is in the value range of 0 to 127; for the display 7 bits are required.
Each bit has a specific value (bit 1=1, bit 2=2, bit 3=4, bit 4=8, bit 5=16, bit
6=32, bit 7=64). The bus address is then the total of the individual values.

To display this with 4 LEDs, selection must be made between the lower
and upper 4 bits (whereby the highest bit 8 has no usage and is always 0).

10.1 Selection of lower 4 bits:

¼ ¾

-

-

-

M short flash, LED 1 long flash

With

(+) or (–) keys to selection of upper 4 bits:

10.2 Selection of upper 4 bits:

¼

-

-

-

¾

M short flash, LED 4 long flash

Upon selection, the bits are displayed. When moving

(+) or (–) keys, the

value is always changed by 1. Pressing ( ) key, the newly entered add-
ress will be activated.

The bus address is the total of the individual values:

Values of the

lower 4 bits and the upper 4 bits:

[1]

[2]

[4]

[8]

Value of the bits

[16]

[32]

[64]

Value of the bits

-

-

-

-

-

0

-

-

-

-

-

0

-

1

-

-

-

1

-

1

-

-

-

16

-

-

1

-

-

2

-

-

1

-

-

32

-

1

1

-

-

3

-

1

1

-

-

48

-

-

-

1

-

4

-

-

-

1

-

64

-

1

-

1

-

5

-

1

-

1

-

80

-

-

1

1

-

6

-

-

1

1

-

96

-

1

1

1

-

7

-

1

1

1

-

112

-

-

-

-

1

8

-

1

-

-

1

9

-

-

1

-

1

10

-

1

1

-

1

11

-

-

-

1

1

12

-

1

-

1

1

13

-

-

1

1

1

14

-

1

1

1

1

15

Note: Addresses 0 and 127 should not be used. Address 126 (delivery condi-
tion) is not permitted for cyclical operation.
For further information see TI EVE0105 P.

In the version with LCD indicator, the address is displayed in decimal and
hexadecimal number system.

10.3 Address
With LCD indicator, this function is recommended, whereby the address
can be completely entered, without separation in LSB and MSB.
The keys have Autorepeat: By pressing and holding of a key

(+) or (–) , the

value is counted upward, after some time in larger steps.

SRD Main Menu

8 Setpoint

9 Workbench

10 Bus address

10 Bus address

10.1 Address LSB

10.2 Adresse MSB

10.3 Address

10 Bus address

10.1 Address LSB

10.2 Adresse MSB

10.3 Address

10.2 Address MSB

Dec: 48 Hex: 30

Upper 3 bits ±16

10 Bus address

10.1 Address LSB

10.2 Address MSB

10.3 Address

10.3 Address

Dec:126 Hex: 7E

Page 52

Startup

August 2014

POS-UM-00009-EN-02

Advertising