Badger Meter SRD/SRI Valve Positioners User Manual
Page 55
Advertising
Open Housing
Unscrew cover safety lock
Z until
cover
C is completely free.
Then unscrew cover
C .
Tilt Electronic Forward
Unscrew the 3 screws
D , and the
round electronic
E can be tilted
forward.
Should the electronic have to be
removed completely, then unscrew
also screw
F , and pull out plug U
from the electronic.
When removing (and when re-
inserting), the correct position of
the flat cables must be observed.
Electronic
E detached.
Upon exchange of the electronic
E,
the angle calibration and an
Autostart must be performed!
Page 55
Maintenance
August 2014
POS-UM-00009-EN-02
Advertising