Option—pressure sensors – Badger Meter SRD/SRI Valve Positioners User Manual
Page 56
Option—Pressure Sensors
Upon unscrewing of the 3 screws
D ,
tilt carefully forward the round
electronic
E – if pressure sensors
are already built-in, the flat cable
G
must be removed first.
For this, unlock the two retaining
clips
H and remove plug.
Secure the “Pressure Sensors”
assembly
J with the two screws K
and bolt
L .
When retrofitting to this option, the
sealing screws in the measuring
holes
M must be removed, and the
(existing) bolt
L must be exchanged
for the (a little shorter) bolt
L
(1.6 mm level difference through the
circuit board).
During mounting, it must be obser-
ved that the conical nipples of the
reducing bushings are correctly fitted
and the 3 measuring holes
M are
free.
Place flat cable
G and lock connec-
tor with retaining clips
H .
Page 56
Maintenance
August 2014
POS-UM-00009-EN-02