Removing the customer unit – NORD Drivesystems BU0020 User Manual
Page 25
Advertising
2 Modules
BU 0020 GB-2612
25
Removing the customer unit
1.
Switch
off
the
mains
voltage,
observe the waiting period.
2.
Remove the cover grille from the
connection area by loosening the 2
screws and levering out the device
cover (slot) or simply pull it out.
3.
Locking lever in the "„open“ position.
4.
Using a screwdriver (as shown),
lever the customer unit out of its
engaged position and then remove it
by hand.
5.
Locking lever in the „closed“
position.
6.
Replace all covers.
Advertising