NORD Drivesystems BU0020 - Manual (Page 60)

PROFIBUS DP – Supplementary manual options for NORD - Frequency Inverters
60 BU 0020 GB-2612
P746
Module status
(Module status)
SK 300E S
0000 ... FFFF (hex) Shows the actual status (readiness, error, communication) of the technology unit (SK TU2-xxx),
but only when own processor is present, i.e. not for SK TU2-CTR.
Example:
0603
hex
High byte = 06
hex
 Profibus
Low byte = 03
hex
 Module ready + connection to master
Details of the codes specific to the bus can be found in the section "Error monitoring" of the
relevant supplementary instructions.
Pos: 91 /Anleitungen/5. Parametrierung/Parameter/P700-P799/Parameter P746 – Baugruppen Zustand [SK 7x0E] @ 1\mod_1335792880284_388.docx @ 25144 @ @ 1
P746
[-01]
...
[-03]
Module status
(Module status)
SK 7x0E S
0000 ... FFFF (hex) Shows the actual status (readiness, error, communication) of
the installed technology unit(s) (if active), but only when own
processor is present, i.e. not for SK TU1-CTR.
Example:
0603
hex
High byte = 06
hex
 Profibus
Low byte = 03
hex
 Module ready + connection to master
Details of the codes specific to the bus can be found in the
section "Error monitoring" of the relevant supplementary
instructions.
[-01] = Technology unit
[-02] = Customer unit
[-03] = Special extension unit
Pos: 92 /Anleitungen/Bussysteme/5. Parametrierung/BUS Parameter SK 5xxE @ 1\mod_1336378272615_388.docx @ 25201 @ 2 @ 1