NORD Drivesystems BU0020 - Manual (Page 55)

6 Parameterisation
BU 0020 GB-2612 55
P482 [-01]
...
[-08]
Norm. BusIO Out Bits
(Standardisation of bus I/O Out bits )
S
- 400 … 400 %
{ all 100 }
Adjustment of the limit values of the relay functions/Bus Out Bits. For a negative value, the output
function will be output negative.
When the limit value is reached and the setting values are positive, the relay contact closes, with
negative setting values the relay contact opens.
The assignment of the arrays correspond to those of parameter (P481).
Pos: 72 /Anleitungen/5. Parametrierung/Parameter/P400-P499/Parameter P483 – Hysterese Bus I/O Out Bits [SK 300E, SK 700E] @ 1\mod_1335779289990_388.docx @ 24802 @ @ 1
P483
[-01]
...
[-08]
Hyst. BusIO Out Bits
(Hysteresis of bus I/O Out bits)
S
1 … 100 %
{ all 10 }
Difference between switch-on and switch-off point to prevent oscillation of the output signal.
The assignment of the arrays correspond to those of parameter (P481).
Pos: 73 /Anleitungen/5. Parametrierung/5.6 Zusatzparameter @ 0\mod_1328091531180_388.docx @ 10880 @ 3 @ 1
6.1.2 Extra functions
Parameter
{factory setting}
Setting value / Description / Note Device Supervisor Parameter set
Pos: 74 /Anleitungen/5. Parametrierung/Parameter/P500-P599/Parameter P507 – PPO-Typ @ 0\mod_1328091974415_388.docx @ 11042 @ @ 1
P507
PPO-Type
(PPO-Type)
1 ... 4
{ 1 }
This parameter can only be used with the technology unit Profibus, DeviceNet or InterBus.
See also the relevant section of the corresponding supplementary BUS manual.
Pos: 75 /Anleitungen/5. Parametrierung/Parameter/P500-P599/Parameter P508 – Profibus-Adresse @ 0\mod_1328092017167_388.docx @ 11065 @ @ 1
P508
Profibus address
(Profibus address)
1 ... 126
{ 1 }
Profibus address, only with the technology unit Profibus
See also the additional description for the Profibus control BU 0020
Pos: 76 /Anleitungen/5. Parametrierung/Parameter/P500-P599/Parameter P509 – Schnittstelle [SK 300E, SK 700E - PBR] @ 1\mod_1335779997127_388.docx @ 24826 @ @ 1