NORD Drivesystems BU0020 - Manual (Page 67)

6 Parameterisation
BU 0020 GB-2612 67
6.2.3 Information
Parameter Setting value / Description / Note Device Supervisor Parameter set
Pos: 113 /Anleitungen/5. Parametrierung/Parameter/P700-P799/Parameter P740 – Prozessdaten Bus In [bis SK 535E] @ 0\mod_1328175248086_388.docx @ 13313 @ @ 1
P740 [-01]
...
[-13]
PZD bus in
(Process data bus in)
up to SK 535E S
0000 ... FFFF (hex) This parameter informs
about the actual control
word and the setpoints that
are transferred via the bus
systems.
For display, a BUS system
must be selected in P509
[-01 ] = Control word
Control word, source from
P509.
[-02] = setpoint value 1
[-03] = setpoint value 2
[-04] = setpoint value 3
Setpoint data from main
setpoint (P510 [-01]).
[-05] = Bus I/O In Bits (P480)
The displayed value depicts all
Bus In bit sources linked with
OR.
[-06 ] = Parameter data In 1
[-07 ] = Parameter data In 2
[-08 ] = Parameter data In 3
[-09 ] = Parameter data In 4
[-10 ] = Parameter data In 5
Data during parameter transfer:
Order label (AK), Parameter
number (PNU), Index (IND),
Parameter value (PWE 1/2)
[-11] = setpoint value 1
[-12] = setpoint value 2
[-13] = setpoint value 3 Setpoint data from the master
function value (Broadcast), if
P509 = 9/10(P510 [-02])
Pos: 114 /Anleitungen/5. Parametrierung/Parameter/P700-P799/Parameter P740 – Prozessdaten Bus In [ab SK 540E] @ 0\mod_1328177837899_388.docx @ 13336 @ @ 1
P740
[-01]
...
[-23]
PZD bus in
(Process data bus in)
SK 540E and
above
S
0000 ... FFFF (hex) This parameter informs
about the actual control
word and the setpoints that
are transferred via the bus
systems.
For display, a BUS system
must be selected in P509
[-01 ] = Control word
Control word, source from
P509.
[-02] = setpoint value 1
[-03] = setpoint value 2
[-04] = setpoint value 3
[-05] = setpoint value 4
[-06] = setpoint value 5
Setpoint data from main
setpoint (P510 [-01]).
[-07] = Bus I/O In Bits (P480)
The displayed value depicts all
Bus In bit sources linked with
OR.
[-08 ] = Parameter data In 1
[-09 ] = Parameter data In 2
[-10 ] = Parameter data In 3
[-11 ] = Parameter data In 4
[-12 ] = Parameter data In 5
Data during parameter transfer:
Order label (AK), Parameter
number (PNU), Index (IND),
Parameter value (PWE 1/2)
[-13] = setpoint value 1
[-14] = setpoint value 2
[-15] = setpoint value 3
[-16] = setpoint value 4
[-17] = setpoint value 5
Setpoint data from the master
function value (Broadcast), if
P509 = 9/10(P510 [-02])
[-18] = PLC control word Control word, source PLC
[-19] = setpoint value 1
[-20] = setpoint value 2
[-21] = setpoint value 3
[-22] = setpoint value 4
[-23] = setpoint value 5
Setpoint data from the PLC.
Pos: 115 /Anleitungen/5. Parametrierung/Parameter/P700-P799/Parameter P741 – Prozessdaten Bus Out [bis SK 535E] @ 0\mod_1328177890266_388.docx @ 13359 @ @ 1