NORD Drivesystems BU0020 - Manual (Page 4)

PROFIBUS DP – Supplementary manual options for NORD - Frequency Inverters
4 BU 0020 GB-2612
Intended use of the frequency inverter
Compliance with the operating instructions is necessary for fault-free operation
and the acceptance of any warranty claims. These operating instructions must
be read before working with the device!
These operating instructions contain important information about servicing.
They must therefore be kept close to the device.
The described optional modules can only be used for the specifically defined
frequency inverter series, use across series is only possible with the SK CU1-
…
module for SK 700E and SK 750E, or the SK TU2-... module with SK 300E and SK
750E. The use of these modules with other devices is not permitted and can lead
to their destruction.
The described optional modules and the corresponding frequency inverters are,
according to their type, devices for stationary installation in control cabinets or
decentralised structures. All details regarding technical data and permissible
conditions at the installation site must be complied with.
Commissioning (commencement of the intended use) is not permitted until it has
been ensured that the machine complies with the EMC Directive 2004/108/EEC
and that the conformity of the end product meets the Machinery Directive
2006/42/EEC (observe EN 60204).

Getriebebau NORD GmbH & Co. KG, 2012
=== Ende der Liste für Textmarke Copyright ===