NORD Drivesystems BU0020 - Manual (Page 57)

6 Parameterisation
BU 0020 GB-2612 57
P543
Bus actual value 1
(Actual bus value 1)
SK 300E /
SK 7x0E
S P
0 ... 12
{ 1 }
The return value 1 can be selected for bus actuation in this parameter.
0 = Off 6 = Actual position (only with POSICON,
SK 7x0E)
1 = Actual frequency 7 = Setpoint position (only with
POSICON, SK 7x0E)
2 = Actual speed 8 = Setpoint frequency
3 = Current 9 = Error number
4 = Torque current (100% = P112) 10 = Actual position increment (only with
POSICON, SK 7x0E)
4
5 = Digital IO status
5
11 = Setpoint position increment (only with
POSICON, SK 7x0E)
4
12 = BusIO Out Bits 0...7
Pos: 80 /Anleitungen/5. Parametrierung/Parameter/P500-P599/Parameter P544 – Bus-Istwert 2 [SK 300E, SK 7x0E - PBR] @ 1\mod_1335786320688_388.docx @ 24904 @ @ 1
P544
Bus actual value 2
(Actual bus value 2)
SK 300E /
SK 7x0E
S P
0 ... 12
{ 0 }
This parameter is identical to P543.
The condition is PPO 2 or PPO 4 type (P507 or rotary encoding switch on technology unit option
SK TUx-PBR-24V).
Pos: 81 /Anleitungen/5. Parametrierung/Parameter/P500-P599/Parameter P545 – Bus-Istwert 3 [SK 300E, SK 7x0E - PBR] @ 1\mod_1335786551087_388.docx @ 24928 @ @ 1
P545
Bus actual value 3
(Actual bus value 3)
SK 300E /
SK 7x0E
S P
0 ... 12
{ 0 }
This parameter is identical to P543.
The condition is PPO 2 or PPO 4 type (P507 or rotary encoding switch on technology unit option
SK TUx-PBR-24V).
Pos: 82 /Anleitungen/5. Parametrierung/Parameter/P500-P599/Parameter P546 – Bus-Sollwert 1 [SK 300E, SK 7x0E] @ 1\mod_1335786897102_388.docx @ 24952 @ @ 1
4
Setpoint/actual position corresponding to an 8192 increment encoder.
5
The assignment of the digital inputs in P543/ 544/ 545 = 5 for SK 700E/ SK 750E
Bit 0 = DigIn 1 Bit 1 = DigIn 2 Bit 2 = DigIn 3 Bit 3 = DigIn 4
Bit 4 = DigIn 5 Bit 5 = DigIn 6 Bit 6 = DigIn 7 (POS or ENC) Bit 7 = DigIn 8 (POS)
Bit 8 = DigIn 9 (POS) Bit 9 = DigIn 10 (POS) Bit 10 = DigIn 11 (POS) Bit 11 = DigIn 12 (POS)
Bit 12 = REL 1 Bit 13 = REL 2 Bit 14 = REL 3 (POS) Bit 15 = REL 4 (POS)