NORD Drivesystems BU0020 - Manual (Page 43)

3 Recommended connector and accessory components
BU 0020 GB-2612 43
3.3 M8 round plug connectors for power supply
M8 socket - 24V supply voltage
Supplier Name Article No. / Part No.
LUMBERG Automation M8 coupling with screw connector, assembly
with screw terminals, 3-pin, IP67 RKMCK 3 / 275130078
Franz Binder GmbH Sensor plug connector, series 768 (M8x1), screw
terminals, 3-pin, IP67 99-3400-100-03
Franz Binder GmbH Encapsulated cable socket, screw-locking, 3-pin,
3m, IP67 79 3406 42 03
24Vdc connection assignments
M8 pin Signal
1 24 VDC ± 25%
3 GND
4 n.c.
Note
If required, ready-made profibus cables of various lengths can be obtained from the
manufacturers listed here. For quicker installation, ESCHA also supplies 3-pin, snap-on
round plug connector couplings in straight and angled versions (Article designation: KP3
and WKP3) with various cable lengths.
Note
For preference, pre-assembled Profibus cables and connection components should be
used for the connection of Profibus cables to technology units. For the selection of M12
round plug connectors, connectors and sockets with hexagonal threaded rings should
preferably be selected and used. By the use of a special torque wrench, the round plug
connectors can be installed or tightened with a defined tightening torque- even in
inaccessible installation locations.
Pos: 51 /Anleitungen/Bussysteme/3. Busaufbau/Profibus [BU0020]!Kapitel Busaufbau @ 1\mod_1335519148607_388.docx @ 24312 @ 1 @ 1