HP XP Continuous Access Software - Manual (Page 111)

1. Ensure that Command View XP or XP Remote Web Console is in Modify mode. For more information,
see the HP StorageWorks Command View XP user guide for XP Disk Arrays or the HP StorageWorks
XP Remote Web Console user guide for XP12000/XP10000/SVS200.
2. Display the DKC Operation pane ( Displaying the DKC Operation pane ).
3. In the Switch Display box, select DKC.
4. Do one of the following:
• In the tree, select a remote array.
• In the list, right-click a remote array, and select Edit Path(s). The list displays information
about logical paths.
5. In the list, select the logical paths you want to delete.
6. Right-click the list, and select Delete Path. A confirmation message appears.
7. Click OK to close the message.
8. In the DKC Operation pane, locate the upper-right list and the Preset list, and check the settings
you made.
• The right-most column of the upper-right list displays Delete to indicate logical paths to be
deleted.
• The Preset list displays logical paths to be deleted.
• To cancel delete logical path operations, right-click the logical paths in the Preset list, and
select Cancel.
9. Click Apply to delete the logical paths.
NOTE:
If an error occurs, the right-most column of the Preset list displays the error code. To view
detailed information about the error, right-click the error code, and select Error Detail. An
error message appears providing detailed information about the error.
Continuous Access XP Journal user guide 111