HP XP Continuous Access Software - Manual (Page 154)

Figure 61 Pairdisplay pane
•
Status: Status of the pair. If the pair is split (or suspended), the column also displays the suspend
type. If the pair is waiting for initial copy, the column also displays Queuing.
• Alternative Path: Alternate path.
• Prog./Sync.: If the volume in the local array is a primary data volume, this column displays
an initial copy operation's progress.
If the volume in the local array is a secondary data volume, this column displays the following
information:
• If the volume pair is not split, this column displays nothing.
• If the volume pair is split and, therefore, is in PSUS or PSUE status, this column usually
displays the synchronization rate (that is, concordance rate) between the secondary data
volume before it was split and the secondary data volume after it was split. For example, the
synchronization rate is 100 percent if the contents of the secondary data volume is the same
before and after the volume pair was split.
CAUTION:
If a failure in the initial copy operation causes the volume pair to be split, this column displays
nothing. If a failure occurs in the initial copy operation, the Pairdisplay pane displays Initial
copy failed.
In the following cases, this column is blank:
• When the volume in the local array is not a primary or secondary data volume.
• When the status of the volume pair is HOLD or HLDE.
• P-VOL: Primary data volume.
154 Performing Continuous Access XP Journal pair operations