P-vol, Restoring business copy xp p-vols, step 1, Figure 19 – HP XP Continuous Access Software User Manual

Page 71: Figure 18

Advertising
background image

Figure 18 Shared CA XP Jour. pri. data vol. & BC XP P-VOL, & CA XP Jour. sec.

data vol. & BC XP P-VOL

Continuous Access XP Journal/Business Copy XP configuration where a Business Copy XP S-VOL

in PSUS status is used as a Continuous Access XP Journal primary data volume
In

Figure 19

, the Business Copy XP S-VOL in PSUS status also functions as a Continuous Access XP

Journal primary data volume. This configuration allows Continuous Access XP Journal to make a

remote backup copy of the Business Copy XP S-VOL.

Figure 19 BC XP S-VOL in PSUS status functioning as CA XP Journal prim. data vol.

If a failure occurs and the Business Copy XP P-VOL is damaged (as shown in

Figure 19

), take the following

steps to copy data from the Continuous Access XP Journal secondary data volume to the Business Copy

XP P-VOL so data can be restored to the Business Copy XP P-VOL:

1.

Execute the RAID Manager XP pairsplit -S command on the Business Copy XP pair to release the pair.

Figure 20 Restoring Business Copy XP P-VOLs, step 1

2.

Execute the RAID Manager XP horctakeover command on the Continuous Access XP Journal pair to

reverse the copy direction and re-establish the pair.

Continuous Access XP Journal user guide

71

Advertising
This manual is related to the following products: