Dkc status pane – HP XP Continuous Access Software User Manual
Page 113
Figure 47 DKC Status pane
•
List:
• No.: Serial numbers used for rows in the list.
• Path Status: Logical path status (see
).
• Port: Port on the local array.
• Pair-Port: Port on the remote array.
•
DKC S/N: Remote array's serial number.
•
Path Gr. ID: Path group ID.
•
M-R Path: Type of channel interface between the local and remote arrays. This column displays
fibre.
•
Minimum Paths: Minimum possible number of paths between the local and remote arrays.
•
RIO MIH Time: RIO MIH timer value, which is the wait time until a data transfer from the local
array to the remote array is complete.
NOTE:
RIO MIH is an acronym for remote I/O missing interrupt handler.
•
DKC Registered: Date and time when the local and remote arrays are associated to each other.
•
Last Updated: Date and time when the last operation on a logical path to the remote array
was performed.
•
Refresh the DKC Operations tab after this panel is closed: If selected, information in the DKC
Operation pane is refreshed after you close the DKC Status pane.
•
Refresh: Refreshes information in the DKC Status pane.
•
Close: Closes the DKC Status pane.
Continuous Access XP Journal user guide
113