Section 3. device application, Get/set/save property commands – MagTek IntelliStripe 320 99875168 User Manual
Page 15
Advertising
9
SECTION 3. DEVICE APPLICATION
Application ID: 00 (Hex)
Description:
This application deals with device functionality.
GET/SET/SAVE PROPERTY COMMANDS
Get Property Command ID: 00 (Hex)
Set Property Command ID: 01 (Hex)
Save Property Command ID: 02 (Hex)
Description:
These commands are used to get, set and save the value of application properties. Details of
these commands are described in the Generic command section of this document. The following
describes each property this application supports.
Advertising