MagTek IntelliStripe 320 99875168 User Manual
Page 46
IntelliStripe 320 Command Reference
40
Bytes Meaning
40
TAi for T=1 value
If TAi for T=1 Present = 1, as received from the card
If TAi for T=1 Present = 0, 0x20
41
TBi for T=1 Present? 0 = no, 1 = yes
42
TBi for T=1 value
If TBi for T=1 Present = 1, as received from the card
If TBi for T=1 Present = 0, 0x4D
43
TCi for T=1 Present? 0 = no, 1 = yes
44
TCi for T=1 value
If TCi for T=1 Present = 1, as received from the card
If TCi for T=1 Present = 0, 0x00
45
T=15 Present? 0 = no, 1 = yes
46
TAi for T=15 Present? 0=no, 1=yes
47
TAi for T=15 value
If T=15 Present = 1, as received from the card
If T=15 Present = 0, 0x01
48
Convention, 0 = direct, 1 = inverse
49
FI, see ISO 7816-3(1997)
50
DI, see ISO 7816-3(1997)
51
II, see ISO 7816-3(1997)
52
PI1, see ISO 7816-3(1997)
53
N, see ISO 7816-3(1997)
54
Specific Mode Indicator, 0 = Negotiable, 1 = Specific
55 Specific
Protocol
56
Specific Mode Implicit Parameters Requested? 0 = no, 1 = yes
57
Specific Mode Changeable, 0 = Changeable, 1 = Not Changeable
58
PI2 Present? 0 = no, 1 = yes
59 PI2
value
If PI2 Present = 1, as received from the card
If PI2 Present = 0, ignore the value
60 WI
61
Clock Stop Allowed Indication
0 = never
1 = stop clock low
2 = stop clock high
3 = stop clock high or low
Note: This is an indication of what stop clock modes are possible for the card, the
IFD does not put a capable card into the clock stop mode.
62
Classes supported by the card
1 = 5 volts only
2 = 3 volts only
3 = both 5 and 3 volts
63
IFSC being supported by the card
64 CWI
65 BWI
66
Error Detection Code
0 = LRC
1 = CRC