MagTek IntelliStripe 320 99875168 - Manual (Page 67)

Section 7. Transport Application
61
MSR DIRECTION PROPERTY
Property ID: 04 (Hex)
Property Type: Dword
Power Up/Reset Value: 1 (Consume)
Get/Set/Save support: All
Description:
This property is used to control the magnetic stripe read direction.
Values:
Value State Description
0 Both The reader can read during both card consuming and ejecting.
1 Consume The reader can only read during card consuming.
2 Eject The reader can only read during card ejection.
Note
If the front-gate option is installed, the IntelliStripe 320 Reader
will be incapable of reliably reading mag-stripe cards during the
card-ejection cycle. (Reliable mag-stripe reading will only be
possible during the card-insertion cycle). If mag-stripe reading is
required during the card-ejection cycle, then the product must be
ordered without the front-gate option.
Example Set Property Request:
Field MTYP APPL CMND RC PTYP PID PVAL
Byte 1 2 3 4 5 6 7 - 10
Value (Hex) 00 82 01 00 01 04 01 00 00 00
(Consume)
Example Set Property Response:
Field MTYP APPL CMND RC
Byte 1 2 3 4
Value (Hex) 40 82 01 00