MagTek IntelliStripe 320 99875168 - Manual (Page 93)

Section 10. OTI SCI 1000 Contactless Smart Card Application
87
Values:
Value AUTOMATIC RF CONTROL PROPERTY
0 OFF
1 ON
Example Set Property Request:
Field MTYP APPL CMND RC PTYP PID
Byte 1 2 3 4 5 6
Value (Hex) 00 0E 01 00 03 01
Field PVAL
Byte 7
Value (Hex)
01 (AUTOMATIC RF CONTROL - ON)
Example Set Property Response:
Field MTYP APPL CMND RC
Byte 1 2 3 4
Value (Hex) 40 0E 01 00
Example Get Property Request:
Field MTYP APPL CMND RC PTYP PID
Byte 1 2 3 4 5 6
Value (Hex) 00 0E 00 00 03 01
Example Get Property Response:
Field MTYP APPL CMND RC PTYP PID
Byte 1 2 3 4 5 6
Value (Hex) 40 0E 00 00 03 01
Field PVAL
Byte 7
Value (Hex)
01 (AUTOMATIC RF CONTROL – ON)
Auto Mode
The contactless module is always in Auto Mode and will automatically read the card’s
equivalent magnetic stripe data when it comes within reading range. The reader will also sound a
buzzer when the contactless card data is successfully read. This data is also sent to the host
automatically.