MagTek IntelliStripe 320 99875168 - Manual (Page 78)

IntelliStripe 320 Command Reference
72
PLAYBACK TONE SEQUENCE COMMAND
Command ID: 80 (Hex)
Description:
This command is used playback a specific tone sequence. On receipt of the command, the
playback sequence is started and success is reported.
Request Message Data:
Byte Usage
1 Specifies which tone sequence to play back. Use the property number of the desired tone
sequence.
Response Message Data: None
Response Message Result Codes:
Success = 00 (Hex)
The command completed successfully.
Example Request: (Playback Tone Sequence 2)
Field MTYP APPL CMND RC DATA
Byte 1 2 3 4 5
Value (Hex) 00 07 80 00 02
Example Response:
Field MTYP APPL CMND RC
Byte 1 2 3 4
Value (Hex) 40 07 80 00