MagTek IntelliStripe 320 99875168 - Manual (Page 96)

IntelliStripe 320 Command Reference
90
SENDING OTI MODULE TRANSPARENT COMMANDS
Command ID: 81 (Hex)
Description:
This command is used to send additional commands to the OTI module through the IntelliStripe
65 interface.
Request Message Data: None
Response Message Data: None
Response Message Result Codes:
Success = 00 (Hex)
The command completed successfully.
Example Request:
This example sends the command to the OTI module to POLL and activate once.
Field MTYP APPL CMND RC
Byte 1 2 3 4
Value (Hex) 00 0E 81 00
Field DATA
Byte
5 – 10
Value (Hex) 00 3E DF 7E 01 03
Example Response:
Field MTYP APPL CMND RC DATA
Byte 1 2 3 4 5 – 7
Value (Hex) 40 0E 81 00 3E 00 00