Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 100)

Page 100
Allied Telesis
AT-8000GS Command Line Interface User’s Guide
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the DHCP snooping configuration.
show ip dhcp snooping binding
The show ip dhcp snooping binding User EXEC mode command displays the DHCP snooping binding
database and configuration information for all interfaces on a switch.
Syntax
show ip dhcp snooping binding [mac-address mac-address] [ip-address ip-address] [vlan vlan] [ethernet
interface | port-channel port-channel-number]
Parameters
•
mac-address — Specify a MAC address
• ip-address — Specify an IP address.
• vlan-id — Specify a VLAN number.
• interface — Specify Ethernet port.
• port-channel-number — Specify Port-channel number
Default Configuration
This command has no default configuration.
Command Mode
EXEC
User Guidelines
There are no user guidelines for this command.
Console# show ip dhcp snooping
DHCP snooping is enabled
DHCP snooping is configured on following VLANs: 2, 7-18
DHCP snooping database: enabled
Option 82 on untrusted port is allowed
Relay agent information option 82 is enabled.
Verification of hwaddr field is enabled
Interface Trusted
---------------------- ----------------------
1/1 Yes
1/2 Yes