Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 344)

Page 344
Allied Telesis
AT-8000GS Command Line Interface User’s Guide
Chapter 34.VLAN Commands
vlan database
The vlan database Global Configuration mode command enters the VLAN Configuration mode.
Syntax
vlan database
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enters the VLAN database mode.
vlan
The vlan VLAN Configuration mode command creates a VLAN. Use the no form of this command to delete a
VLAN.
Syntax
vlan vlan-range
no vlan vlan-range
Parameters
•
vlan-range — Specifies a list of VLAN IDs to be added. Separate nonconsecutive VLAN IDs with a comma
and no spaces; a hyphen designates a range of IDs.
Default Configuration
This command has no default configuration.
console(config)# vlan database
console(config-vlan)#