Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 333)

System Management Commands
Page 333
Example
The following example displays the system defaults.
console# show system defaults
System Mode: Switch
# Management defaults
Telnet: Enabled
SSH: Enabled
HTTP: Enabled, port 80
HTTPS: Enabled, port 443
SNMP: Enabled.
User: first
SNMP version: V3
SNMP Local Engine ID: 00001
SNMP Notifications: Enabled
SNMP Authentication Notifications: Enabled
AAA Telnet authentication login: Local user data base
AAA HTTP authentication login: Local data base
AAA HTTPS authentication login: Local data base
Radius accounting: Disabled
Logging: Enabled
Logging to console: Informational messages
Logging to internal buffer: Informational messages
Logging to file: Error messages
Logging to remote server: Informational messages
Maximum no. of syslog messages: 200
SNTP Port No.: 123
SNTP Interface: Disabled
IP Domain Naming System: Enabled
DHCP Auto Configuration: Enabled
DHCP Option 67: Enabled
IPv6 defaults
# 802.1x defaults
802.1X is disabled
Mode: Multiple session
Guest VLAN: Not defined
# Interface defaults in present unit