Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 358)

Page 358
Allied Telesis
AT-8000GS Command Line Interface User’s Guide
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays VLANs used internally by the device.
show interfaces switchport
The show interfaces switchport Privileged EXEC mode command displays the switchport configuration.
Syntax
show interfaces switchport {ethernet interface | port-channel port-channel-number}
Parameters
•
interface — A valid Ethernet port number.
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
console# show vlan internal usage
VLAN Usage IP address Reserved
---- --------- ---------- --------
1007 Eth 1/g21 Active No
1008 Eth 1/g22 Inactive Yes
1009 Eth 1/g23 Active Yes