Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 109)

Ethernet Configuration Commands
Page 109
Command Mode
Global Configuration mode.
User Guidelines
The command is effective only after reset.
Example
The following example enables jumbo frames for the device.
system flowcontrol
Use system flowcontrol Global Configuration mode to enable flow control on cascade ports. Use the no form of
this command to disable it.
Syntax
system flowcontrol
no system flowcontrol
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
In the following example enable flow control on cascade ports.
clear counters
The clear counters EXEC mode command clears statistics on an interface.
Syntax
clear counters [ethernet ethernet | port-channel port-channel-number]
Console(config)# port jumbo-frame
console(config)# system flowcontrol