Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 213)

QoS Commands
Page 213
Chapter 23.QoS Commands
qos
The qos Global Configuration mode command enables quality of service (QoS) on the device. Use the no form of
this command to disable QoS on the device.
Syntax
qos
no qos
Parameters
This command has no arguments or keywords.
Default Configuration
QoS is disabled on the device.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables QoS on the device.
show qos
The show qos User EXEC mode command displays quality of service (QoS) for the device.
Syntax
show qos
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
console(config)# qos