Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 217)

QoS Commands
Page 217
wrr-queue cos-map
The wrr-queue cos-map Global Configuration mode command maps Class of Service (CoS) values to a specific
egress queue. Use the no form of this command to return to the default configuration.
Syntax
wrr-queue cos-map queue-id cos1...cos8
no wrr-queue cos-map [queue-id]
Parameters
•
queue-id — Specifies the queue number to which the CoS values are mapped.
• cos1...cos8 — Specifies CoS values to be mapped to a specific queue. (Range: 0 - 7)
Default Configuration.
Command Mode
Global Configuration mode
User Guidelines
Queue 4 is reserved for stacking.
Example
The following example maps CoS 7 to queue 2.
2 1
3 2
4 3
5 3
6 4
7 4
Value (VPT) Queue
0 2
1 1
2 1
3 2
4 3
5 3
6 4
7 4
console(config)# wrr-queue cos-map 2 7