Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 64)

Page 64
Allied Telesis
AT-8000GS Command Line Interface User’s Guide
show bridge multicast address-table
The show bridge multicast address-table Privileged EXEC mode command displays the bridge Multicast
Address Table information.
Syntax
show bridge multicast address-table [vlan vlan-id] [address mac-multicast-address | ip-multicast-address]
[format ip | format mac] [source ip-address]
Parameters
•
vlan-id — A valid VLAN ID value.
• mac-multicast-address — A valid MAC Multicast address.
• ip-multicast-address — A valid IP Multicast address.
• ip-address — Source IP address
• format ip|mac — Multicast address format. Can be ip or mac. If the format is unspecified, the default is mac.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
A MAC address can be displayed in IP format only if it is in the range of 0100.5e00.0000-0100.5e7f.ffff.