Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 110)

Page 110
Allied Telesis
AT-8000GS Command Line Interface User’s Guide
Parameters
•
ethernet — Valid Ethernet port. (Full syntax: unit/port)
• port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode or Privileged EXEC Mode
User Guidelines
There are no user guidelines for this command.
Example
In the following example, the counters for interface 1/g1 are cleared.
set interface active
The set interface active Privileged EXEC mode command reactivates an interface that was shutdown.
Syntax
set interface active {ethernet interface | port-channel port-channel-number}
Parameters
•
interface — Valid Ethernet port. (Full syntax: unit/port)
• port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command is used to activate interfaces that were configured to be active, but were shutdown by the system
for some reason (e.g., port security).
Example
The following example reactivates interface 1/g5.
console> clear counters ethernet 1/g1
console# set interface active ethernet 1/g5