Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 331)

System Management Commands
Page 331
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the system information .
show version
The show version User EXEC mode command displays system version information.
Syntax
show version [unit unit]
Parameters
•
unit— Specifies the number of the unit. (Range: 1 - 6)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays system version information (only for demonstration purposes).
Console> show system id
Unit Serial number
-------------------- --------------------
1 8936589782
2 3216523877
console> show version