Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 142)

Page 142
Allied Telesis
AT-8000GS Command Line Interface User’s Guide
no arp timeout
Parameters
•
seconds — Time (in seconds) that an entry remains in the ARP cache. (Range: 1-40000000)
Default Configuration
The default timeout is 60000 seconds.
Command Mode
Global Configuration mode
User Guidelines
It is recommended not to set the timeout value to less than 3600.
Example
The following example configures the ARP timeout to 12000 seconds.
clear arp-cache
The clear arp-cache Privileged EXEC mode command deletes all dynamic entries from the ARP cache.
Syntax
clear arp-cache
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example deletes all dynamic entries from the ARP cache.
console(config)# arp timeout 12000
console# clear arp-cache