Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 181)

LLDP Commands
Page 181
User Guidelines
•
For each port, only one network policy per application ( voice, voice-signaling, guest-voice,
guest-voice-signaling, softphone-voice, video-conferencing, streaming-video and video-signaling)
can be defined.
Example
The following example attaches an LLDP MED network policy to a port.
lldp med location
The lldp med location Interface Configuration mode command configures location information for the LLDP MED
for an interface. Use the no form of this command to delete location information for an interface.
Syntax
lldp med location coordinate data
no lldp med location coordinate
lldp med location civic-address data
no lldp med location civic-address
lldp med location ecs-elin data
no lldp med location ecs-elin
Parameters
•
coordinate — The location is specified as coordinates.
• civic-address — The location is specified as civic address.
• ecs-elin — The location is specified as ECS ELIN.
• data — The data format is as defined in ANSI/TIA 1057. Specifies the location as dotted hexadecimal data.
For coordinated: 16. For civic address: 6 - 160. For ECS ELIN: 10 - 25.
Default Configuration
The location is not configured.
Command Mode
Interface Configuration (Ethernet) mode.
User Guidelines
There are no guidelines for this command.
Example
The following example configures location information for the LLDP MED for an interface.
console(config)# interface ethernet g5
console(config)# lldp med network-policy add 1
console(config)# lldp med location coordinate data