Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 276)

Page 276
Allied Telesis
AT-8000GS Command Line Interface User’s Guide
Command Mode
MST Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example exits the MST configuration mode without saving changes.
show spanning-tree
The show spanning-tree Privileged EXEC mode command shows spanning tree configuration.
Syntax
show spanning-tree [ethernet interface -number| port-channel port-channel-number] [instance instance-id]
show spanning-tree [detail] [active | blockedports] [instance instance-id]
show spanning-tree mst-configuration
Parameters
•
detail —Display detailed information.
• active — Display active ports only.
• blockedports — Display blocked ports only.
• mst-configuration — Display the MST configuration identifier.
• interface-number — Ethernet port number.
• port-channel-number — Port channel index.
• instance-id — ID associated with a spanning-tree instance.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
console(config) # spanning-tree mst configuration
console(config-mst) # abort