Goulds Pumps IC - IOM - Manual (Page 13)

Product Description
General description
The model IC is a single-stage volute casing pump. Hydraulic design and dimensions comply with ISO
2858/ EN 22858. The technical design complies with ISO 5199/EN 25199. The model ICI additionally
has an inducer. Models ICH and ICIH additionally have cooling or heating of the casing cover and/or the
volute casing.
Casing
• Heavy-duty, top centerline discharge
• Integral cast feet
• Back pullout design
• Standard 3/8 in. NPT casing drain
• Optional renewable wear ring
Impeller
The impeller is fully enclosed and key driven by the shaft. Standard back vanes or balance holes reduce
axial thrust and seal chamber pressures.
Seal chamber
• Wide choice of sealing arrangements for maximum sealing flexibility
• Patented “cyclone” seal chamber for improved lubrication, heat removal, and solids handling
• Confined casing gasket
Power end
• Large capacity oil sump reduces oil temperature for extended bearing life.
• Heavy-duty cast iron frame gives rigid support to the shaft and bearings for longer service.
• Magnetic drain plug maintains a clean oil environment for extended bearing life.
• Standard double lip seals at the pump and coupling end maintain a seal tight, clean operating
environment.
• O-ring seal between the frame and adapter for optimized alignment and sealing.
Frame adapter
• Provides safe and accurate alignment for the liquid end to the bearing frame.
• Large access windows make installation and maintenance of seal and auxiliary support systems
trouble-free.
Product Description
Model IC, ICI, ICH, ICIH Installation, Operation, and Maintenance Manual 11