RADWAG MA 200.3Y Moisture Analyzer - Manual (Page 120)

- 120 -
communicating the moisture analyzer with a barcode scanner is provided in
APPENDIX F of this user manual..
The moisture analyzer enables communicating with a barcode scanner using
the following:
•
RS 232 (COM1),
•
RS 232 (COM2),
Offset
Setting the first data carrying character of a barcode, which is the first
recognized character while searching for a product.
Code length
Setting number of characters recognized during searching for a product.
21.4. Transponder card scanner
Selecting (logging) a user on each switching on the moisture analyzer can be
carried out by means of:
•
Inserting user’s password using on-screen keyboard,
•
With a transponder card scanner, by approximating a registered card to the
scanner.
Caution:
For correct moisture analyzer’s cooperation with a transponder card scanner set
appropriate baud rate value in submenu <
Communication> (default 9600b/s).
Transponder card scanner port.
The moisture analyzer enables communicating with a transponder card
scanner using the following ports:
•
RS 232 (COM1),
•
RS 232 (COM2).
Assigning number of a card to a user:
In order to log in an operator using a transponder card scanner, first assign a
number of an already registered card to a selected user in the database of
operators.
Procedure:
•
Connect a transponder card scanner to a moisture analyzer’s port (RS 232
COM1 or RS 232 COM2), select communication port in moisture analyzer
settings for the transponder card scanner
•
In submenu < Communication> set baud rate for compatible with the
one of the transponder card scanner (default 9600b/s).