RADWAG MA 200.3Y Moisture Analyzer - Manual (Page 72)

- 72 -
Automatic finish mode – user defined criterion (change of moisture
content)
An operator determines limit loss of moisture content over time of 60s. As the
moisture analyzer reaches the set criterion it automatically finishes the
measurement (drying process).
Manual finish mode
An operator ends drying process manually by pressing STOP soft key on
moisture analyzer’s display.
Time defined finish mode
Drying process finish takes place on elapsing a set amount of time,
independently on measurement result.
18. DRYING PROCESS
18.1. Working mode activating procedure
•
while in the main window, press soft key located in the upper bar of the
display, which opens a submenu <Working modes> with selection of
available working modes,
•
select < Drying > mode, the software automatically returns to the
main window and displays pictogram in the upper bar,
The grey coloured workspace contains the following data:
o
Drying mode
o
Product
On selecting the drying mode , the display contains the following
quick access keys in the bottom bar: