RADWAG MA 200.3Y Moisture Analyzer - Manual (Page 16)

- 16 -
When assembling the pan
supporter (bracket) pay special
attention to the correct
positioning of its mandrel. The
mandrel features a cut for its
unique positioning against the
pan handle, thus preventing their
contact and friction.
Setting pan’s bracket:
-
On assembling the pan
bracket onto the mandrel,
turn the bracket slightly, so
that the cut on the mandrel
is located in their unique and
correct position,
-
When turning the mandrel use
most gentle movements not
to damage moisture
analyzer’s measuring system.
4.3. Level setting
The moisture analyzer MA 3Y series features an electronic level control
system (and thus no external level). After software startup enter the leveling
application and follow moisture analyzer prompts to carry out the leveling
procedure.
Means of moisture analyzer leveling is described further in this user manual
(see point 11.3).
4.4. Standard delivery components
• A moisture analyzer MA 3Y series.
• Insert of drying chamber basis.
• Drying chamber shield.
• Drying pan handle.
• Drying pan bracket.
• Disposable pan.
• Power cord.
• Protective cover
• Cable P0108 for connecting moisture analyzer and computer
• User manual (CD).