RADWAG MA 200.3Y Moisture Analyzer - Manual (Page 125)

- 125 -
23.3. “Beep” sound
Procedure:
Enter submenu < Others>, press < Beep> and set one of available
options.
No - Beep sound switched off (disabled) for keys and proximity
sensors
Keys - Beep sound active as reaction to pressing keys
Sensors - Beep sound active as reaction to operation of proximity
sensors
All - Beep sound reacting to both keys and proximity sensors
23.4. Volume
The user may adjust power of the loudspeaker which is mounted in a read head:
To adjust the volume:
Press
key, next select „ Other / Volume” option. Using on-screen
keyboard enter percent value of the volume. 100% is the highest volume, 0%
the lowest (loudspeaker off).
23.5. Sleep mode
The user has the sleep mode at his disposal, thus he can turn off the display.
In order to enter the sleep mode:
•
press key, next press: „ Others / Sleep mode”.
On entering the option one of the following settings must be selected: [None;
1; 2; 3; 5; 10; 15]. Digit values stand for a number of minutes. Upon
selection of a desired value the program returns to the previous menu level.
Caution:
The screen turns to sleep mode only when the balance is not operated (the indication
on the screen remains the same). Upon turning to the sleep mode the balance
returns to weighing mode automatically if only any weight modification is detected or
screen touch or key on an overlay pressed.
23.6. Display brightness
Display brightness influences balance operation time, when the balance is
powered by means of a battery. If the user wants to lengthen the operation
cycles as much as possible he should reduce the brightness of the display.
In order to enter the display brightness option:
•
press key, next press: „ Others / Display brightness”.