Konica Minolta bizhub 161f - Manual (Page 106)

5.1 Dialing 5
bizhub 161f 5-3
Fa
x
in
g
Cha
p
ter 5
5 Press the [Start] key to begin scanning and sending the fax.
To fax using one-touch dialing
If one-touch dial keys have already been programmed with fax numbers, the fax
number of a recipient can be specified by pressing just the corresponding one-
touch dial key.
For details on programming the one-touch dial keys, refer to “Setting Up One-Touch
Dialing (“ONE-TOUCH DIAL” function)” on page 7-35 .
1
Press the [Fax] key to enter Fax mode.
2
Load the document into the Automatic Document Feeder.
3
If necessary, change the “Resolution” setting (p. 5-11).
4 Press the one-touch dial key ([01] through [15]) programmed with the fax
number that you wish to send the fax to.
5 Press the [Start] key.
The machine automatically starts
scanning the document and
sending the fax.