Warning – Konica Minolta bizhub 161f User Manual

Page 16

Advertising
background image

1.1 Safety Information

1

bizhub 161f

1-3

Int

ro

duc

tio

n

Chap

ter

1

Disassemble and modification

• Do not attempt to remove the covers and panels

which have been fixed to the product. Some products
have a high-voltage part or a laser beam source
inside that could cause an electrical shock or
blindness.

• Do not modify this product, as a fire, electrical shock,

or breakdown could result. If the product employs a
laser, the laser beam source could cause blindness.

WARNING

Power cord

• Use only the power cord supplied in the package. If a

power cord is not supplied, only use the power cord
and plug that is specified in POWER CORD
INSTRUCTION. Failure to use this cord could result in
a fire or electrical shock.

• Use the power cord supplied in the package only for

this machine and NEVER use it for any other product.
Failure to observe this precaution could result in a fire
or electrical shock.

• Do not scratch, abrade, place a heavy object on, heat,

twist, bend, pull on, or damage the power cord. Use of
a damaged power cord (exposed core wire, broken
wire, etc.) could result in a fire or breakdown.
Should any of these conditions be found, immediately
turn OFF the power switch, unplug the power cord
from the power outlet, and then call your authorized
service representative.

WARNING

Advertising
This manual is related to the following products: