Konica Minolta bizhub 161f - Manual (Page 124)

6.1 Transmission Methods 6
bizhub 161f 6-5
F
a
x
T
rans
mi
ss
io
n/Re
ce
pti
on M
e
th
ods
Ch
apt
er
6
To send a fax manually
1 Load the document into the Automatic Document Feeder.
2 If necessary, change the “Resolution” setting (p. 5-11).
3 Pick up the telephone receiver.
❍ Check that the dial tone can be
heard.
4 Specify the fax number of the recipient.
❍ Use the telephone to dial the fax number.
❍ The fax number of the recipient can also specified using the keys in the
Control Panel of this machine (p. 5-2).
5 After finishing talking on the phone, the recipient should press the necessary
key to start receiving the fax.
Once the recipient’s fax machine is ready, a beep is sounded.
6
Press the [Start] key to begin
scanning and sending the fax.
7 Replace the telephone receiver.
❍ To stop the transmission, press the [Stop] key.
✎
Tip
If the [Speaker] key is pressed instead of picking up the telephone receiver, the
speaker can be used for manual transmission in the same way as described
above.