Konica Minolta bizhub 161f - Manual (Page 207)

7 7.8 Setting Up the Transmission
7-60 bizhub 161f
Us
in
g th
e Uti
lit
y
Mod
e
Chap
ter
7
✎
Tip
If, at any time, you wish to quit setting a “TX OPERATION” function, press the
[No/C] key. When the message “STOP SETTING?” appears, press the [Yes]
key to quit.
Specifying the Setting for “SCAN CONTRAST”
1
Select the “TX OPERATION”.
❍ Refer to “Selecting the “TX OPERATION” menu” on page 7-59 .
2 Press the [1] key from the 10-Key
Pad to select “SCAN
CONTRAST”.
3 Using the [ ] and [ Ö ] keys, select
one of the five settings between
“LIGHT” and “DARK”, and then
press the [Yes] key.
The “TX OPERATION” menu
appears again.
Specifying the Setting for “RESOLUTION”
1 Select the “TX OPERATION”.
❍ Refer to “Selecting the “TX OPERATION” menu” on page 7-59 .
2 Press the [2] key from the 10-Key
Pad to select “RESOLUTION”.
Ц