Konica Minolta bizhub 161f - Manual (Page 221)

7 7.10 Settings Up the Communication
7-74 bizhub 161f
Us
in
g th
e Uti
lit
y
Mod
e
Chap
ter
7
Specifying the Setting for “PSTN/PBX”
The connected wiring system can be set to either PSTN (Public Switched
Telephone Network) or PBX (Private Branch Exchange).
For a PBX system, the outside line access number (or extension number) must be
specified. The outside line access number (or extension number) is programmed in
the [#] key.
To specify the telephone wiring system
1
Press the [Utility] key nine times.
The first screen of the Utility mode
appears.
2 From the 10-Key Pad, press the
[3] key.
3 Using the [ ] and [ Ö ] keys, select
either “PSTN” (Public Switched
Telephone Network) or “PBX”
(Private Branch Exchange), and
then press the [Yes] key.
4
If “PBX” was selected, use the 10-
Key Pad to enter the number that
should be dialed to access the
outside line, and then press the
[Yes] key.
The “COMM.SETTING” menu appears again.
Ц