9 what does each message mean, What does each message mean? -26 – Konica Minolta bizhub 161f User Manual

Page 255

Advertising
background image

8

8.9 What Does Each Message Mean?

8-26

bizhub 161f

W

hen

a M

e

s

s

a

ge A

p

p

ear

s

Ch

apte

r 8

8.9

What Does Each Message Mean?

Message

Cause

Action

*REMOVE PAPER IN BYPASS
TRAY*

Paper is loaded in the Bypass
Tray.

Remove the paper from the
Bypass Tray.

FRONT COVER OPEN

CLOSE FRONT COVER

The Front Cover of the main
unit is open or not securely
closed.

Securely close the Front Cover.

DOCUMENT COVER OPEN

CLOSE DOCUMENT COVER

The Automatic Document
Feeder is lifted up (while a
document is loaded into it).

Securely close the Automatic
Document Feeder or remove
the document from the
Automatic Document Feeder.

DOC.FEED COVER OPEN

CLOSE DOC.FEED COVER

The Document Feeder Cover is
open.

Securely close the Document
Feeder Cover.

MEMORY FULL

PRESS ANY KEY

The size of the data for the
scanned document has
exceeded the capacity of the
memory.

Press the [Panel Reset] key, or
turn the machine off, then on
again. (The scanned data
should be cleared from the
memory.)

MACHINE TROUBLE

SERVICE CALL (C####)

Some problem occurred in the
machine.

Turn the machine off, then on
again. If the error is still
displayed, contact your service
representative.

FUSER COVER OPEN

CLOSE FUSER COVER

The Fuser Cover of the main
unit is open or not securely
closed.

Securely close the Fuser
Cover.

PAPER JAM

OPEN FRONT COVER

A paper misfeed occurred.

Perform the misfeed-cleaning
procedure. (p. 8-16)

All misfed paper was not
removed from the main unit.

The Fuser Cover of the main
unit is open or not securely
closed.

Close the Fuser Cover, then
open and close the Front
Cover.

NO SUITABLE PAPER

LOAD PAPER (LT)

In Fax mode, plain paper of a
size other than Letter, Legal or
A4 is loaded into the paper tray.

Load plain paper of the
appropriate size into Tray1 or
the optional Tray2.

INCORRECT T/C TYPE

CHANGE T/C

Incorrect type of toner cartridge
is installed.

Install the correct type of toner
cartridge. (p. 8-5)

Toner cartridge is not installed.

Install the toner cartridge.
(p. 8-6)

Advertising
This manual is related to the following products: