Konica Minolta bizhub 161f - Manual (Page 109)

5 5.1 Dialing
5-6 bizhub 161f
Fa
x
in
g
Cha
p
ter 5
To fax using chain dialing
Faxes can be sent to recipients that are specified using any combination of one-
touch dial keys, speed dial numbers, direct input using the 10-Key Pad, and the
[Redial] key.
As an example, the following procedure describes how to specify recipients using
one-touch keys, then using the 10-Key Pad.
1 Load the document into the Automatic Document Feeder.
2
Press the [Speaker] key.
3 Press the desired one-touch key,
and then press the [Start] key.
4 After the message “PRESS
START KEY” appears, use the 10-
Key Pad to enter the recipient’s fax
number.
5 Press the [Start] key.